AD-435NC
suitable for processing Ф0.15mm ~ Ф3.0mm fine holes, yellow and red copper tubes are available, stable performance, high processing efficiency;
10 material databases: each can store various processing parameters;
The processing conditions can be fine-tuned to suit different processing occasions. Also available with built-in parameters for easy operation.;
Can process various conductive materials such as stainless steel, hardened steel, carbide, copper, aluminum, etc.;
Maximum processing speed up to 60mm per minute;
Metric/Imperial Display units, direct conversion;
The machining axis Z is divided into three axes, which makes the operation more flexible;
Controllable processing depth for easy operation;
The Z-axis is equipped with precision servo motor for good stability of drilling;
Automatic pressure relief high pressure pump.
Items | Unit | AD-435NC |
X Axis Travel | MM | 450 |
Y Axis Travel | MM | 350 |
Z1 servo axis up and down travel |
| 400 |
Z2 auxiliary axis up and down travel |
| 250 |
Z3 guide shaft up and down travel | PCS | 120 |
Working table water surface tank area | MM | 940 x 530 |
The highest workpiece | MM | 350 |
Electrode size | MM | 0.15-3.0 |
Max. Workpiece Weight | MM | 300 |
Overall size | CM | 120 x 110 x 220 |
Machine Weight | KGS | 800 |
Wire guider | 1.0MM 1PC |
Filter | 1PC |
Electrode tube | 1.0MM 10PCS |
TOOLBOX | 1SET |
WORKING LAMP | 1SET |
Stopper beans | 5PCS |
20L bucket | 2PCS |
LINEAR SCALE AND DISPLAY COUNTER | 1SET |